Drip hose 16 mm

This 16mm drip hose ensures even and efficient watering of your garden. Holes are placed every 33cm along its entire length, slowly and precisely distributing water exactly where your plants need it. This keeps borders, hedges, flowerbeds, and vegetable gardens optimally moist, without waste. Each hole has a flow rate of 2.2 liters/hour.

The drip hose easily connects to the 16 mm main hose of your irrigation system using the required 16 mm fittings. Place the drip hose in the desired locations, secure it with ground pegs, and connect the end to the beginning. This creates a closed circuit and optimizes pressure distribution within the hose. You can easily cut the drip hose to the desired length with our handy cutting guide.

The strong, UV-resistant material will last for years and withstand all weather conditions. You can lay the hose above ground or subtly conceal it under a layer of mulch. Ideal for long rows of plants and narrow strips where even water distribution is important.

The biggest difference with a sweat hose is that water comes out of holes pierced at fixed intervals, in this case 33 cm. If you want to water directly at the roots, a drip hose is usually the best choice. If you want consistent moisture over a larger area, a sweat hose is a good option. A sweat hose "sweats" along its entire length.